Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt

A collection of random how to articles that I've compiled. The sky is the limit.
Post Reply
southhawkct
Site Admin
Posts: 388
Joined: Sun Oct 05, 2014 9:29 pm
Status: Offline

Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt

Post by southhawkct »

Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!


Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt
Installed on: 09-19-2010
Total Install time: 2 Hours


Hello Pioneer AVIC-710BT and goodbye stock mach 460 head unit... :) I removed the pioneer unit from my jeep and put it in the mustang. Just needed 2 parts
METRA 95-5026 01-06 FORD/LINCOLN/MERCURY DOUBLE DIN KIT
and
METRA 70-5519 1998-06 FORD/LINCOLN w/AMP WIRE HARNESS

wiring the amp was a little bit tricky. Good thing for google
this link help with my questions with wiring

http://community.crutchfield.com/forums ... 63757.aspx
here's the photos

Image

Image

Image

Here's the slash screen that i put together for the unit :D
Image

This install should be the same for the following models AVIC-F900BT, AVIC-F700BT, AVIC-X910BT, AVIC-X710BT, AVIC-F90BT & AVIX-F7010BT
---
South Hawk Computing LLC Owner :ugeek:
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices. :geek:

Post Reply