Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt

A collection of random how to articles that I've compiled. The sky is the limit.
Post Reply
southhawkct
Site Admin
Posts: 388
Joined: Sun Oct 05, 2014 9:29 pm
Status: Offline

Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt

Post by southhawkct »

Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!


Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt

Total Install time: 2.2 Hours


Step one:
Here's what the inside of our bumper looks like. There are 3 spots where you have to screw your foglight into.
Image

Step two:
Bullitts already have the wiring for fog lights just look up inside the front bumper. You'll see this.
Image

Here's the fog lights that i ordered.
Image
Ford Part numbers for the Fog lights are:
XR3Z-15200-AA
XR3Z-15200-BA



Step three:
Here are the 3 point were the screws need to go into.
Image

Step Four:
The Nuts and bolts that i used to put the foglights in.
Image

Step Five:
Next I install the Fog light switch. Ford part number: 1R3Z-15A214-AA
Image

Step Six:
The Final Product!
Image
---
South Hawk Computing LLC Owner :ugeek:
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices. :geek:

Post Reply