Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt
Posted: Wed Apr 22, 2015 3:36 pm
Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!
Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt
Installed on: 09-19-2010
Total Install time: 2 Hours
Hello Pioneer AVIC-710BT and goodbye stock mach 460 head unit...
I removed the pioneer unit from my jeep and put it in the mustang. Just needed 2 parts
METRA 95-5026 01-06 FORD/LINCOLN/MERCURY DOUBLE DIN KIT
and
METRA 70-5519 1998-06 FORD/LINCOLN w/AMP WIRE HARNESS
wiring the amp was a little bit tricky. Good thing for google
this link help with my questions with wiring
http://community.crutchfield.com/forums ... 63757.aspx
here's the photos
Here's the slash screen that i put together for the unit
This install should be the same for the following models AVIC-F900BT, AVIC-F700BT, AVIC-X910BT, AVIC-X710BT, AVIC-F90BT & AVIX-F7010BT
Installing aftermarket radio in a 2001 Ford Mustang GT Bullitt
Installed on: 09-19-2010
Total Install time: 2 Hours
Hello Pioneer AVIC-710BT and goodbye stock mach 460 head unit...
I removed the pioneer unit from my jeep and put it in the mustang. Just needed 2 partsMETRA 95-5026 01-06 FORD/LINCOLN/MERCURY DOUBLE DIN KIT
and
METRA 70-5519 1998-06 FORD/LINCOLN w/AMP WIRE HARNESS
wiring the amp was a little bit tricky. Good thing for google
this link help with my questions with wiring
http://community.crutchfield.com/forums ... 63757.aspx
here's the photos
Here's the slash screen that i put together for the unit
This install should be the same for the following models AVIC-F900BT, AVIC-F700BT, AVIC-X910BT, AVIC-X710BT, AVIC-F90BT & AVIX-F7010BT